What Is A Reciprocating Saw
The reciprocating saw is a tool for cutting through the reciprocating motion of the blade. It is mainly used for demolition work and can cut wood, metal pipes, stones and other materials. Whether it is construction site or housework, reciprocating saws can make work easier.
Table of Contents
Common uses of reciprocating saws
Plumbing
When performing plumbing work for your house, you can use a reciprocating saw to make holes for the pipes.
Pruning trees
If you want to prune branches in the garden, a reciprocating saw is a good choice. It can cut hardwood branches effortlessly, saving you a lot of time.
Building demolition
You can trim your roof and windows with a heavy duty reciprocating saw.
Blade
Generally, the blades of reciprocating saws are designed to cut wood. If you want to cut different materials, you need to use different blades. The fine-toothed blade is suitable for cutting metal pipes and nails, and the common maximum TPI is 24. The coarsest-tooth blade can be used to cut plaster.
Some blades have no teeth. They are coated with tungsten carbide abrasives. They are most suitable for stone and ceramic tiles, because these materials may crack or chip if they are cut directly with teeth.
Safety is important
- Debris may splash during the work of the reciprocating saw, so be sure to wear protective glasses.
- When cutting in a small space, be careful not to cut the wires.
- When the blade is working, it will rub and generate heat. Don’t touch the blade just after working to prevent burns.
- During operation, if too much pressure is applied, the blade may bend. This may mean curved cuts, dangerous jumps of tools. If your blade is severely bent, you must change it in time.
Use a reciprocating saw
Be sure to hold the reciprocating saw firmly to prevent accidents caused by jumping during work. Hold the saw correctly, place the non-dominant hand in front of the bottom, and hold the handle and trigger with the dominant hand. It is important to apply proper pressure on the reciprocating saw when cutting. Keep the saw blade cutting along the cutting line and lift it up after cutting.
Finally
The reciprocating saw is easy to operate and has a wide range of uses. If you do not currently have a reciprocating saw, I definitely recommend you to buy one, it can help you handle a lot of work.